Ok so I got a chance to get some testing in and here is what I think may be going on. Again - it does not occur on every just seems to be random at this point. I think i have covered all the pertinent settings relating to this issue of the 4-5 second freezes, if anyone has any ideas on how to eliminate this please let me know! I have been trying to figure it out for a minute now and I am still seeing the problem.

Despite what people have said about forscam though I have had a decent experience with these cameras - aside from the poor picture quality, when running on wifi and hardwired these cams have stayed running and caught every bit of motion with no issues - no dropped signal on wifi either. Both of these cameras are set in their firmware to deliver 30fps however BI has never been able to get more than 7.5fps day and 3.8fps night (this is another issue all together and I plan on phasing these cameras out shortly). Both are 640x480 hard wired on cat6 recording motion via re-encoded h.264 with 1.5mb receive buffers. Camera set at 30fps, BI set to receive at the max(33fps with auto adjust off), 10mb receive bufferĢ Tenvis JPT3815w (basically forscam knockoffs). Video records to a usb terabyte portable hdġ Poker PTZ 2MP cam hard wired on CAT6 recording motion d2d. (just updated today - this was occurring on 4.0.0.21 as well) Intel core i7 with 6GB ram dedicated pc - cpu usage hovers around 5-10%, RAM usage around 40-50% running BI4.0.0.22 service.

This is occurring on all cameras however the freezes on the 2 tenvis cameras are only about 2 or 3 seconds. it will start recording, look good and then just freeze randomly for about 4 or 5 seconds as if the clip was paused (I tried uploading both an mp4 and avi clip of the freeze but i keep getting invalid file error from ipcamtalk?). On some of my clips I get about a 4 or 5 second freeze in the clip.

Tenvis v264 player